Menu

contact for  service 

contact for service :-  If you are facing problems. Here your can get solutions.

How to Setup Canon Pixma MG3620 Printers to WiFi and Windows?

 

Canon is the best printer in this technological world, and among them, Canon Pixma MG3620 is one. You can set up your Canon printers physically by following numerous steps. Initially, you have to control the printer and interface it through WiFi or some other remote in your framework. With that, you need to arrange it physically in your framework, and in case, on the off chance that you can't do as such, or you are confronting any trouble– How to Setup Canon Pixma MG3620 Printers to WiFi and Windows? You must follow the effective steps to resolve the issue, or else you can get in touch with the specialists.

 

Steps to Setup Canon Pixma MG3620 Printers

 

Step 1: First, unpack the Printer and place it on a plane surface.

Step 2: Attach the device through a power cable to the outlet

Step 3: Eliminate all the tapes from the Printer.

Step 4: Now, Open the lid, and lower the print cartridge access door

Step 5: After that, Take out the cartridges from the packets and install them

Step 6: Finally, you can setup Canon Pixma Mg3620 Printers.

 

Guidelines to Connect Canon Pixma MG3620 printer to WiFi

If you want to know– How to Connect Canon Pixma MG3620 printer to WiFi, you must follow the guidelines. But, before that, you must understand that what's required for connecting.

  • The access point should have a WPS push button. 
  • The network must be using both WPA and WPA2 security protocols.  

The steps to connect Canon mg3620 printer to WiFi are:

 

Step 1: First, make sure that your new Canon printer is turned on. 

Step 2: Press and hold the WiFi button located at the top of the printer. 

Step 3: You must tap it until the indicator flashes once. 

Step 4: Be sure that the indicator lamp starts to flash blue after some time.

Step 5: Navigate to the access point and press the WPS button within few minutes. 

 

With these steps, you can get your Printer Connected to WiFi. However, if you want to know how to set up Canon Pixma MG3620 printer Wireless Setup to Mac, you must proceed with the effective tips. 

 

Tips to Setup Canon Pixma MG3620 printer Wireless Setup to Mac

 

Step 1: Go to the official website of Canon.

Step 2: Search Canon MG3620 and select the Operating System.

Step 3: Tap on the Download button to start the Canon printer setup mg3620 process.

Step 4: The setup will now display a list of messages before you.

Step 5: Check all the messages and tap on the option–Always allow or Open the option to finish the setup process.

 

The above-mentioned tips help you set up the process, and if you are looking for any help related to the Canon mg3620 printer ink cartridge, you can get in touch with the service provider. 

 

Related Post 

How to connect canon mg2922 printer to wifi

Go Back

Comment

Blog Search

Comments

There are currently no blog comments.